LED tailights

I found some affordable LED tail lights OEM style, for like $60 a set.. I installed them tonite.. They work fine, except now my blinkers won't blink.. The only other time that happened was when I tore a wire off one side on my stock lights.. Any ideas??
I guess I can always blink them manually, cause I keep forgettting they are non-auto-return and drive for miles with one or the other blinking..

 

Probably not enough amp draw to operate the bi metallic in the flashed unit. Common to have to swap in an electronic flasher unit that is not reliant on amp draw to make them flash

 

Another trick is to install a resistor inline to draw some more amps to get it to flash

 

I have LEDs as my tail lights and front parking lights. I have a flasher from these guys and I am also using their lights..

http://http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Ftail-brake-turn.html

 

Yup, not enough load to activate the stock flasher unit. Either the electronic replacment module or the resistor trick will work to correct the problem.

 

The link doesn't work.. But will any electronic flasher work? Do you have a part number?

Good grief.. I just did a search looking for info on my OEM blinker. Do you know what they are going for on flea bay? ~ $50!!! Tung Sol 224

 

try this one....

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Ftail-brake-turn.html

 

The link works , but I am still not sure which flasher I need. My OEM flasher is a two prong, and I see lots of choices on that site.. I am assuming that the 12 volt input has to be to the correct terminal..

 

Grote 44891 available at your local flaps should work for you.

 

Thanx, I had a brain fart and completly forgot about local parts places.. I stopped and bought a flasher for like $6!! It works great!! Thanx for all the help everyone.