1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another, but different, wheel question

Discussion in 'Early CJ5 and CJ6 Tech' started by sbu22, May 17, 2011.

Page 2 of 2
  1. May 23, 2011
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    There's Wheel-Vintiques also, sold by Summit, Jeg's and all the usual suspects. They have some horror stories as well regarding quality control but they do offer some nice options for old-school-style wheels.
     
    w3srl, May 23, 2011
    #21
  2. May 24, 2011
    sbu22

    sbu22 Member

    New Orleans
    Joined:
    Nov 15, 2008
    Messages:
    72
    wheelie - that seems to be the opinion of several threads over several years on this forum. W3 - I've checked them out - I think my quest is going to end with one of the shops that fabs steel wheels. I'm going to try to find a vendor that will build me a 15x8, 5 on 5.5, with 0.5 stud holes, reverse with 3.75 backspace, steel wheel. Hoping that will give me the KH "look". Anyone want to weigh in on the center hole diameter? Just by pulling a tape, it looks like 4.25" will do it. Am I missing anything ?
     
    sbu22, May 24, 2011
    #22
  3. May 25, 2011
    sbu22

    sbu22 Member

    New Orleans
    Joined:
    Nov 15, 2008
    Messages:
    72
    Anybody on the 4.25" center hole dimension ?
     
    sbu22, May 25, 2011
    #23
  4. Aug 27, 2011
    SKT

    SKT I Like CJ's...

    Location
    Joined:
    Nov 13, 2006
    Messages:
    644
    .

    I gotta agree, those are some of the best looking wheels I've seen on a '5!

    Where did they come from/where can they be found nowadays?

    .
     
    SKT, Aug 27, 2011
    #24
Page 2 of 2
New Posts