1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

My 1970 stainless steel body cj5

Discussion in 'Builds and Fabricators Forum' started by Dave Bougher, May 9, 2011.

  1. May 9, 2011
    Dave Bougher

    Dave Bougher Member

    San Diego CA
    Joined:
    Sep 3, 2010
    Messages:
    54
    check out my 1970 cj5 i inherited from my dad about 3 years ago, when i got it, it was sitting for close to 10 years not running. i got the 225 running, rebuilt the tran. and x-case just finished fab of stainless steel seat brackets and custom installed some 3/8" thick rubber flooring. i plan on stripping the paint down to stainless and drive it around for a while and then maybe paint what you see in red in black.check out my photobucket link. some feedback would be cool.

    http://s1226.photobucket.com/albums/ee418/dbougher/
     
  2. May 9, 2011
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,422
    I thought that was a stainless steel jeep - seen post about steering column - haven't seen one of those body's in 20+ years - good looking jeep - keep in family
    one other note - I build a hot rod few years back and used column out of 68 Olds . no key on column
     
  3. May 9, 2011
    givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    2,008
    wow.... so cool!
     
  4. May 10, 2011
    gcoupe

    gcoupe New Member

    Joined:
    Apr 27, 2011
    Messages:
    8
    very shiny...it will be very good with the black color and all the stainless steel...!!!!
     
  5. May 10, 2011
    Dave Bougher

    Dave Bougher Member

    San Diego CA
    Joined:
    Sep 3, 2010
    Messages:
    54
    ya, i think the black will look the best. before i get there i am going to get new 2 1/2" lift springs, shocks, as well as new updated rims and tires BFG mud terrain. as far as the top, for know i am going to go with a black bikini top and soft half doors. living in san diego i should be good almost year around.
     
  6. May 11, 2011
    1fastsedan

    1fastsedan Member

    Orange, CA
    Joined:
    Aug 18, 2009
    Messages:
    142
    how much more weight does all that stainless add? it's basically bullet proof!
     
  7. May 12, 2011
    Dave Bougher

    Dave Bougher Member

    San Diego CA
    Joined:
    Sep 3, 2010
    Messages:
    54
    as per the chart i looked at stainless is 4% more in weight than steel. i am not sure how much a stock 1970 cj5 weight is but whatever it is its 4% more in weight, i thought it would be more.
     
  8. May 12, 2011
    CJ5aTim

    CJ5aTim 66 Tux

    N.E. Indiana
    Joined:
    Mar 22, 2010
    Messages:
    224
  9. May 12, 2011
    1fastsedan

    1fastsedan Member

    Orange, CA
    Joined:
    Aug 18, 2009
    Messages:
    142
    the tub probably weighs around 400 lbs???. so 4% of 400 is 16lbs. i would take 16lbs over rust any day!
     
  10. May 13, 2011
    Dave Bougher

    Dave Bougher Member

    San Diego CA
    Joined:
    Sep 3, 2010
    Messages:
    54
    i looked up the weight of a stock 1970 cj5 and it weighs 2,273 lbs. add 4% to that and you get 2,364 lbs. so that means there is only an additional 91 lbs of weight, i can handle that. ya i will never have to worry about rust, that is for sure. it is amazing that the jeep sat in the rain and 116 deg. weather for over 10 years before my dad passed away and the worst thing that happen was the transmition filled up with water, the paint on the hood is a little cracked but i am going to take it down to stainless anyway. My brother got the house and i took the jeep, i think i am the one that made out the best.
     
  11. May 13, 2011
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    Unless you have a SS frame and drivetrain your numbers won't work.
     
New Posts