1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

PTO shaft for Ramsey Winch

Discussion in 'Early CJ5 and CJ6 Tech' started by jglad, Mar 3, 2011.

  1. Mar 3, 2011
    jglad

    jglad Village Idiot

    Glenville, WV
    Joined:
    Oct 5, 2008
    Messages:
    123
    I have a Ramsey PTO Winch that I need to get a pto shaft made for. My question is does the shaft need some sort of slip yoke on it or can the yokes be fastened solid to both ends of the shaft?
     
    jglad, Mar 3, 2011
    #1
  2. Mar 3, 2011
    PaulG

    PaulG New Member

    Vancouver Washigton
    Joined:
    Nov 9, 2010
    Messages:
    39
    Mine has three shafts, two hangers and no slips, and works fine.
     
    PaulG, Mar 3, 2011
    #2
  3. Mar 4, 2011
    Scotter270

    Scotter270 New Member

    Colorado
    Joined:
    Mar 4, 2010
    Messages:
    17
    Mine has 2 shafts, 1 hanger, and no slips. Works like a champ.
     
    Scotter270, Mar 4, 2011
    #3
  4. Mar 11, 2011
    atuomi

    atuomi rookie

    Smithers, BC, Canada
    Joined:
    May 16, 2006
    Messages:
    34
    Mine has 1 shaft and no slip. Starts to whip pretty bad if you spin it too fast. I'll change it to a 2 piece one at some point.
     
    atuomi, Mar 11, 2011
    #4
New Posts