1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Firewall

Discussion in 'Early Jeep Restoration and Research' started by Montana Brown, Nov 10, 2010.

  1. Nov 10, 2010
    Montana Brown

    Montana Brown cowboy shooter

    Commerce, Ga
    Joined:
    Nov 16, 2004
    Messages:
    30
    Does anyone have a picture of a factory 1971 firewall layout. My firewall is 100% stock and I'd like to run everything back where it belong. I don't have pics because I bought this jeep as a basket case.
    Any help would be great.

    Thanks
     
  2. Nov 10, 2010
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
  3. Nov 10, 2010
    wmunny

    wmunny Member

    Joined:
    Sep 23, 2006
    Messages:
    62
    [​IMG]


    [​IMG]


    couple of 71's
     
  4. Nov 10, 2010
    Montana Brown

    Montana Brown cowboy shooter

    Commerce, Ga
    Joined:
    Nov 16, 2004
    Messages:
    30
    Thanks guys,

    I also need a shot of the drivers side beside the heater box where the e/brake comes thru. I have 3 holes on that side. One is 1 1/4 inches and the other two are 3/4 inches.

    I figure one is for the e/brake and one of the others is for the heater box baffle control cable. Don't have a clue on the other.
     
  5. Nov 11, 2010
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I believe the other is for the windshield washer hose. Hose goes from the reservoir bag on the fender through the firewall, to the pump on the dash, then to the nozzle on the cowl.
     
  6. Nov 11, 2010
    wmunny

    wmunny Member

    Joined:
    Sep 23, 2006
    Messages:
    62
New Posts