1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

How to remove brake master cylinder

Discussion in 'Intermediate CJ-5/6/7/8' started by BrettM0352, Oct 31, 2010.

  1. Oct 31, 2010
    BrettM0352

    BrettM0352 Member

    Fort Worth, TX
    Joined:
    Oct 14, 2010
    Messages:
    448
    I can't figure it out for the life of me and I figured I should ask before I break something. How do you disconnect the push rod from the master cylinder?
     
    BrettM0352, Oct 31, 2010
    #1
  2. Oct 31, 2010
    bluedchrome

    bluedchrome New Member

    Kansas
    Joined:
    Apr 17, 2008
    Messages:
    38
    When I replaced my MC on my stock '73, there is a snap ring that holds the brake pedal push rod in that you have to remove. It was kind of fun to get mine out...
     
    bluedchrome, Oct 31, 2010
    #2
  3. Oct 31, 2010
    BrettM0352

    BrettM0352 Member

    Fort Worth, TX
    Joined:
    Oct 14, 2010
    Messages:
    448
    How did you get to it? I see what you are talking about in the FSM but it doesnt have a clear way of explaining how to remove it either.
     
    BrettM0352, Oct 31, 2010
    #3
  4. Oct 31, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Did you remove the master cylinder from the Jeep? You need to remove the push rod from the brake pedal arm..
     
    Patrick, Oct 31, 2010
    #4
New Posts