1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need help with rear axle

Discussion in 'Early CJ5 and CJ6 Tech' started by PieLut, Sep 29, 2010.

Page 2 of 2
  1. Oct 1, 2010
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    The one I built:

    [​IMG]

    [​IMG]

    Good use of an old hub.
     
    Warloch, Oct 1, 2010
    #21
  2. Oct 1, 2010
    cj5_327

    cj5_327 New Member

    Phoenix
    Joined:
    Sep 23, 2010
    Messages:
    43
    NICE!!! Do you loan out tools?
     
    cj5_327, Oct 1, 2010
    #22
  3. Oct 1, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Excellent.

    I like the ones from Don and oldtime too... but the use of the hub is kinda neat somehow.
     
    timgr, Oct 1, 2010
    #23
  4. Oct 6, 2010
    jeeperjoel

    jeeperjoel New Member

    Jacksonville, Tx
    Joined:
    Oct 6, 2010
    Messages:
    4
    If you have a shop press of 20 ton or better, that works well. If the hub/axle have been together since time began, you may still need to apply heat. Wear your cup, cause they come apart with much force.
     
    jeeperjoel, Oct 6, 2010
    #24
Page 2 of 2
New Posts