correct T90 mount behind 225

Did a search and cant seem to find what is the correct mount for my T90 sitting behind the 225. I'm not sure what the PO had on there was correct. It was the kind with a rectangular rubber piece sandwiched between 2 metal pieces. sorry no pic. I have seen a ton of different ones sold all over the net. I understand that it may have been a T86 originally there with different motor but do they use the same mounts?
thanks for any help I can get

 

From what I've read, the T90 was never mated with the 225. It was a T86 or a T14.

 

right, not originally. There is an adapter to marry it up to the 225. Thats why I want to make sure the mount I have is not just a re-used part fom the old trani. So if anybody has a pic of their 225/T90 mount can you post it please? that would probly be the easiest to compare mine to.
thanks

 

If the T90 has the same bolt pattern as the T14, then there's a picture about 2/3 of the way down on this page. http://www.earlycj5.com/forums/showthread.php?t=61798

 

the Jeep p/n would be A-6156
should be available at the Jeep parts places
2 studs, top and bottom, 4 total
stock F4 mount
same as flatties too.

 

I believe the difference in the t 90 case and the t 86 case is so small it is like splitting hairs. I would check into that mount.
When I swapped out the t 86 for a t 14 I had to move my cross member a bit to line up all the mounts holes, you may look into that

 

Thanks a buch jpflat2a, I just ordered one yesterday.