1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

paint: clear coat versus single stage

Discussion in 'Early CJ5 and CJ6 Tech' started by 57cj5, Apr 16, 2010.

  1. Apr 18, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    It's my understanding that epoxies are very tough, and have low health risk (compared to isocyanate catalyzed paints), but that they are not very UV stable. The surface will become chalky with long exposure.

    This seems contrary to what you'd expect from marine paints though. Maybe it's a tradeoff between UV and humidity?
     
  2. Apr 18, 2010
    57cj5

    57cj5 Member

    North Carolina
    Joined:
    Aug 31, 2005
    Messages:
    593
    The guy that will be painting my jeep is the one that has been doing the restoration. He did tell me the Red would cost more due to the pigments. I wouldn't try painting the Jeep myself partly due to no paint booth and lack of experience. After reading all the posts I am strongly leaning toward BC/CC. Thanks for the information and opinions. I will post pics after the job is complete.
    Paul
     
  3. Apr 18, 2010
    blazer

    blazer Member

    arkansas
    Joined:
    Feb 8, 2007
    Messages:
    56
    a shop may not do it or if they will they may charge more,but you can have both and if you use compatable paints.single stage with a clearcoat over it,holds up real good on-offroad
     
  4. Apr 23, 2010
    joe28

    joe28 Member

    North Eastern Pa.
    Joined:
    Oct 21, 2009
    Messages:
    170
    Holy Drive Lines Batman!:D
    I thought I was the only "knucklehead" to paint his "toys" Rustoleum!:D
    My boys are always busting me when I drag home a project...
    "Hey Dad! Been to Lowes to pick your color out"?
    Having put myself through trade school decades ago working in a body shop, here's my 2 cents..................
    IF.... you shot paint before, have a place that's dust free, a GOOD gun, BC-CC is the ticket.
    IF.... Someone else is doing it- BC-CC and have him buff it to a shine that'll hurt your eyes!:rofl:
    If your gonna do it.....................
    You can lay enough clear on it to make the color look deep, (even tint the clear).
    Clear can be hard to shoot, runs happen..................
    IF.....
    You so-so painter (like me)
    Shoot enamel.
    it's not rocket science, but you gotta be careful.
    If it's a so-so body, gonna be used and abused, (like mine), go to Lowes and pick your color out, and a few cans of spray to touch up!:D
    Joe
    Hey! My '61 cost less than $100 to shoot it! That includes the paint hardner, reducer, tape and beer!:rofl:
     
  5. Apr 23, 2010
    Scotter270

    Scotter270 New Member

    Colorado
    Joined:
    Mar 4, 2010
    Messages:
    17
  6. Apr 23, 2010
    57cj5

    57cj5 Member

    North Carolina
    Joined:
    Aug 31, 2005
    Messages:
    593
    My painter is experienced. I will likely be painting the interior single stage viper red and the exterior clear coat/base coat viper red. I will post pics as soon as it is done. Which forum do I post in though? I will have before, during, and after pics. I spoke with the painter today and he should be ready within a week or so (fingers crossed). paint job may be too good to take it off road.....
     
  7. Apr 23, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    start a build thread in the build/fab forum :beer:.....looking forward to pics
    Jim
     
New Posts