1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

PTO Winch on 72 to 75 frame

Discussion in 'Intermediate CJ-5/6/7/8' started by lonewolfjeeper, Mar 19, 2010.

  1. Mar 19, 2010
    lonewolfjeeper

    lonewolfjeeper New Member

    Cameron Wisconsin
    Joined:
    Jan 14, 2006
    Messages:
    38
    Has anyone put a PTO winch on an intermediate frame?
    I have a Koenig PTO winch and I'm looking for mounting ideas.

    Thanks
     
    lonewolfjeeper, Mar 19, 2010
    #1
  2. Mar 20, 2010
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Mar 20, 2010
    #2
  3. Mar 21, 2010
    DREDnot

    DREDnot Not new to JEEPS

    AZ
    Joined:
    Feb 7, 2010
    Messages:
    646
    I had a ramsey that fit between the rails and was able to fab a PTO shaft no problem

    [​IMG]
     
    DREDnot, Mar 21, 2010
    #3
  4. Mar 23, 2010
    lonewolfjeeper

    lonewolfjeeper New Member

    Cameron Wisconsin
    Joined:
    Jan 14, 2006
    Messages:
    38
    How far did the the winch move the bumper out??
    If possable I don't want to move the bumper out any further than I have too.
     
    lonewolfjeeper, Mar 23, 2010
    #4
  5. Mar 24, 2010
    DREDnot

    DREDnot Not new to JEEPS

    AZ
    Joined:
    Feb 7, 2010
    Messages:
    646
    At least the width of the winch.
    But it moved out there a ways with the roller fairlead and all.
    Thats why I had to angle the ends of the bumper back.

    looks like a duece-and-a-half, w/winch.:D
     
    DREDnot, Mar 24, 2010
    #5
New Posts