1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

V6 e-brake cable routing

Discussion in 'Early CJ5 and CJ6 Tech' started by rossbos, Dec 16, 2009.

  1. Dec 16, 2009
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Trying to find the route that the e-brake cable takes when it leaves the firewall passes the engine and arrives at the e-brake drum. It wasn't present when I got the jeep and am having a hard time finding a route that stays away from the exhaust. Not a lot of room anywhere that I can see. This is a 225 v6 and any help would be appriciated. Pictures if possible theyr'e worth a thousand words.
     
    rossbos, Dec 16, 2009
    #1
  2. Dec 16, 2009
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    Mine had a clip that attached to the driver side inner fenderwell then down to x-member.sorry no pics ,disassembeled.might be able to find clip if you need one .I went to Lokar E-Brake setup.

    mike s.
     
    mike starck, Dec 16, 2009
    #2
  3. Dec 16, 2009
    jeeperneil

    jeeperneil New Member

    Owosso Mi.
    Joined:
    Nov 23, 2009
    Messages:
    49
    Do you have the part number on the Lokar set up. I'm kinda havin the same issue but in reverse order mines hooked to the t-case and nothing else. Also does the Lokar kit come with a new cable?
     
    jeeperneil, Dec 16, 2009
    #3
  4. Dec 17, 2009
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    The LOKAR web site will have all the info there.Adaptable to most vehicles.PM me about used parts if you need stock parts.

    mike
     
    mike starck, Dec 17, 2009
    #4
New Posts