1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ford Script Owners

Discussion in 'Flat Fender Tech' started by Pops, Oct 17, 2009.

  1. Oct 17, 2009
    Pops

    Pops New Member

    Joined:
    Oct 9, 2009
    Messages:
    2
    Gentlemen...your knowledge is needed! I found a "Ford" a few years ago. Motor has since been removed but I believe there are some parts that may be helpful to some of you. I have tried posting pictures on this forum but for the life of me it's beyond my skill level. I would like to share photos with you folks because I am tired of seeing mother nature taking her toll on it with our winters here in Alaska. It has a hard top screwed,welded and duck taped to the tub. I was able to find the word Ford written on a couple parts. Does anyone know whre it is written on the other parts? Are there any parts that anyone could use. If this is the wrong area to be asking these questions Please point me to the right area. Hope all you have a great day. Here is my email address if you are interested.

    03ultra@mtaonline.net
     
  2. Oct 17, 2009
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    743
    EVERY Ford part has a mark. Either the script F or Ford spelled out. Mostly the F, but every part. Bolt heads, brackets, pedals, everything. When I put the locker in the back of my MB, I found it had F script differential gear bolts!
     
  3. Oct 18, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,925
    The lower half of my tail-gate hinge is stamped "F" (on my 66 Tux) and I believe it to be original..
     
  4. Oct 19, 2009
    kernel

    kernel New Member

    san jose, ca
    Joined:
    Oct 25, 2006
    Messages:
    41
    Mike C is 100% correct and it sounds like u know that. if it's a ford part somewhere it will be marked. somebody on g503 has compiled/is compiling a picture list of where the f's are stamped/cast on/into the part.

    example of scrip & block.
    [​IMG]

    ford guys are nuts for f marked parts... so ur probably going in the right direction (money wise) if you part it out.
     
    Last edited: Oct 19, 2009
  5. Oct 24, 2009
    Pops

    Pops New Member

    Joined:
    Oct 9, 2009
    Messages:
    2
    Thanks for the reply. I have no use for this particular rig, mainly want to focus on my 48 Pickup but do not like to see this go to waste if there are pople that could use the parts. Not looking to get rich off something I got for free, don't want any bad JuJu. I have hauled parts for people from my parts collection when we drive home to New Mexico for vacation but now the wife and I ride the Harley although I did pick up a part for my father inlaws ford baler (the wheel that tells the wire its time to tie the knot) in my saddlebag.
     
  6. Oct 24, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,925
    WOW!!! Alcan hi-way on a Harley.. What an adventure..
     
  7. Oct 28, 2009
    CJ-X

    CJ-X Member

    Ohio
    Joined:
    Aug 6, 2006
    Messages:
    816
    The link did not work for me.
     
New Posts