saginaw install with pto winch

i have a 69 cj5,v6 with the pto winch.it doesnt look like theres any room to mount the sag box.anybody know of a method?

 

I have heard some of the guys have put the box behind the cross member on the side the tthe motor mount is on. I Just did mine but I put it up front behind the bumper. Keep asking there is not many of them done that way.

 

i'm just wondering,would'nt the fr axle hit the tie rod in its travel?

 

Which winch? I have a Koenig model 100 on my CJ5 with saginaw ps, it fits with an extra inch or two, but then again mine is all custom mounts. I will try to find a picture this evening showing the spacing.

If you mean a Ramsey or something else I do not know about that.......

 

I have sag. steering and a Ramsey pto winch on my Jeepster...not a CJ but has the same front framerails..I can try to take a couple pics if you want.

 

I have a Koenig winch. I shifted the winch to the pass side to make room for the saginaw box. I will try to take pictures for you.

 

It will fit, I think. I have a copy of a Ramsey winch and power steering on my 67 CJ5. If your winch is 1/2 inch wider than mine, then there might not be enough room, but my winch is pretty wide.

Here is a picture....

http://www.zianet.com/jworman/steering.html

John