1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

wiring harness

Discussion in 'Early CJ5 and CJ6 Tech' started by harleyman71302, Dec 17, 2008.

  1. Dec 17, 2008
    harleyman71302

    harleyman71302 New Member

    Joined:
    Dec 16, 2008
    Messages:
    12
    i have a 1967 jeep cj5 with a v-6 ; alot of the wirning is missing or just too old to do anything with! does anyone know of anyone who makes up new harness's? it would be appreciate! thank you ! steve gordy
     
  2. Dec 17, 2008
    floor ya

    floor ya NOT. a junior anything

    Joined:
    Dec 4, 2008
    Messages:
    19
    ez wiring makes a great harness .every thing including the wires them selves are marked .makes for a simple install. and about half the cost of painless.
     
  3. Dec 17, 2008
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    x2...that's what I used on my cj6
    Jim S.
     
  4. Dec 17, 2008
    Malachai

    Malachai Total Newbie! :D

    Plattsmouth, Ne
    Joined:
    Oct 16, 2008
    Messages:
    99
    X2 again, just finished up wiring my 61 with a mini 12 from ez wiring, and so long as ya get the wires in the right spot, you are golden!
     
  5. Dec 19, 2008
    bergy9

    bergy9 Jeep Maffia, CJ 5 Chapter

    Lincoln City, OR
    Joined:
    Jul 2, 2007
    Messages:
    184
    I went with a Painless.
     
  6. Dec 19, 2008
    DKillam

    DKillam Sponsor

    San Angelo, Texas
    Joined:
    Oct 31, 2005
    Messages:
    228
    I used an EZ 21 circuit along with www.madelectrical.com accessories - Start-em up kit, alternator kit, junction blocks and relay kits - best on the market. Save your money on the EZ harness and spend the difference on the accessories. :)
    Only thing I didn't like about the EZ harness was the lack of instructions - may have improved by now.
     
  7. Dec 19, 2008
    Malachai

    Malachai Total Newbie! :D

    Plattsmouth, Ne
    Joined:
    Oct 16, 2008
    Messages:
    99
    Unless it has improved in the past 2 months, I didnt get any instructions either...
     
New Posts