1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

pivot ball part number for the dauntless v6?

Discussion in 'Early CJ5 and CJ6 Tech' started by surfj9009, Nov 9, 2008.

  1. Nov 9, 2008
    surfj9009

    surfj9009 New Member

    Spokane, WA
    Joined:
    Sep 10, 2005
    Messages:
    44
    does anybody have one? Schucks, napa, federated, autozone, etc?
    Posted via Mobile Device
     
    surfj9009, Nov 9, 2008
    #1
  2. Nov 9, 2008
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,540
    If you can't find one locally, try Novak Conversions.
     
    Posimoto, Nov 9, 2008
    #2
  3. Nov 9, 2008
    tommycj

    tommycj Member

    Joined:
    Mar 24, 2007
    Messages:
    143
    Try the website "The Jeep Guy"
     
    tommycj, Nov 9, 2008
    #3
  4. Nov 10, 2008
    surfj9009

    surfj9009 New Member

    Spokane, WA
    Joined:
    Sep 10, 2005
    Messages:
    44
    I tried the jeep guy, but his website only shows the 4 cylinder pivot ball. He does have a good price on my motor mounts and he has lots of other small parts. Good site, but I am still searching for the damn pivot ball.........
    Posted via Mobile Device
     
    surfj9009, Nov 10, 2008
    #4
  5. Nov 10, 2008
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,540
    Posimoto, Nov 10, 2008
    #5
  6. Nov 10, 2008
    surfj9009

    surfj9009 New Member

    Spokane, WA
    Joined:
    Sep 10, 2005
    Messages:
    44
    novak does not have them
    Posted via Mobile Device
     
    surfj9009, Nov 10, 2008
    #6
  7. Nov 10, 2008
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,938
    i could have sworn the 4cyl and 6cyl used the same pivot balls. Thought it was just a different length shaft
     
    jeep2003, Nov 10, 2008
    #7
  8. Nov 10, 2008
    bobo

    bobo Sponsor

    canby or
    Joined:
    Aug 12, 2008
    Messages:
    69
    I bought one from Herm, a monh ago
     
    bobo, Nov 10, 2008
    #8
  9. Nov 11, 2008
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,474
    That is correct (assuming your talking about the pivot ball on the Tcase for the mechanical clutch)...
     
    Warloch, Nov 11, 2008
    #9
New Posts