1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

new top

Discussion in 'Intermediate CJ-5/6/7/8' started by junker, Aug 17, 2008.

  1. Aug 17, 2008
    junker

    junker Member

    rimersburg, pa
    Joined:
    Nov 25, 2005
    Messages:
    55
    i'm considering stepping back into a 73. anyone know where the best place to buy a rag top is? all the hardware is present but fabric is shot. thanks, dpoug
     
  2. Aug 18, 2008
    SPackard

    SPackard New Member

    Tulsa, OK
    Joined:
    Aug 4, 2008
    Messages:
    21
    I think the only place still making them is Bestop. You may have to check if your hardware will work with their skins.
     
  3. Aug 18, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    If you have the old top, a local upholstery shop could make you a new one using th old one as a pattern. Places that make tops and covers for boats are said to be a good source. Don't know how cost-effective it will be though ... may be cheaper just to buy a complete new top.
     
  4. Aug 18, 2008
    junker

    junker Member

    rimersburg, pa
    Joined:
    Nov 25, 2005
    Messages:
    55
    yes i do think it is the original top. so i highly doubt bestop's would fit over my hardware. still, need a top whenever i get te $$$.....so it might have to be bestop. jeep was last on the road in 88. it's a one owner jeep. i'll have to see if i bring it home but everything is there and i don't think there is a nonoriginal part on it. floors are rough, motor is siezed-258. fenders are shot from the owner sliding into them in the winter. but i have fenders from an 81 cj7 for it. overall the body and frame are decent. doesn't seem to have any bondo in it. so if i do get it, it would be a while until its back on the road. but i need a replacement for my 81 and i could prolly pick this one up for a couple hundred. thanks, doug
     
    Last edited: Aug 18, 2008
  5. Aug 24, 2008
    junker

    junker Member

    rimersburg, pa
    Joined:
    Nov 25, 2005
    Messages:
    55
    went back over today. motors not locked up turns freely by hand. pass floor pan shot but hat channels there driver floor need a small patch and rear floor rusted thru but easy fix. 61000 miles and asking price is $200 i'll probably snatch it up if a buddy is next in line
     
  6. Aug 24, 2008
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Shoot, the tub is worth more than $200.
     
  7. Aug 25, 2008
    Filandras

    Filandras New Member

    Joined:
    Jun 8, 2008
    Messages:
    48
    I might be interested in the hardware if you get it. I have a Whitco top that I bought for my old jeep long ago. All I need to do is clear the windows and add original bows and rods.
     
  8. Sep 7, 2008
    junker

    junker Member

    rimersburg, pa
    Joined:
    Nov 25, 2005
    Messages:
    55
    got her home yesterday. changed oil filter points ect and she fired right up.
     
  9. Sep 7, 2008
    1cdccop

    1cdccop Member

    Susanville CA
    Joined:
    Jul 8, 2008
    Messages:
    65
    Can I have your front seats?
     
  10. Sep 13, 2008
    junker

    junker Member

    rimersburg, pa
    Joined:
    Nov 25, 2005
    Messages:
    55
    not at this time. maybe if i find replacements.
     
New Posts