1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

74 CJ5 w/ 225 oddfire. help guys

Discussion in 'Early CJ5 and CJ6 Tech' started by motocrazy2006, Jun 25, 2008.

  1. Jun 25, 2008
    motocrazy2006

    motocrazy2006 New Member

    Joined:
    Apr 15, 2008
    Messages:
    10
    alrite.. i posted while back i had a 74 CJ5 with a 225 oddfire V6..

    put a new set of points in it and it fired right up.. didnt run the best under a load... so put vacumm to the EGR and it ran better...

    put new set of plugs in it.. and when i went to put hte wires on.. just put them on the way they came out. well noticed. that the cap is number 123456 in order... and the wires went on in the way of the firing order.. so i put them to the nubmers and it ran alot better.. did have the carb rebuilt

    now my question is... this thing id dead on the top end... once over 1/2 throttle its dead

    my question is.. is it in my timing? its got the delco ignition in it do i need to adjust my points in or out? or is t here something else wrong? like the vacuum advnace?

    or is my distributor off a tooth.. very slight differnce in the runnin when you advnace/retard timing... xcept it will die when you turn it too far the one way.

    or does my carb need adjusted? you guys are the experts.. any help would b appreciated..
     
    motocrazy2006, Jun 25, 2008
    #1
  2. Jun 25, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Moving to the ECJ5 section for more :v6: exposure.
     
    sparky, Jun 25, 2008
    #2
  3. Jun 27, 2008
    motocrazy2006

    motocrazy2006 New Member

    Joined:
    Apr 15, 2008
    Messages:
    10
    alrite i have been doing some reading.. and seems like the Timing is 180 off it will run.. just have no power above 2500, and one side exhuast will be cold. ill have to check the exhuast.
     
    motocrazy2006, Jun 27, 2008
    #3
  4. Jun 27, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    That's possible. I didn't suggest it since I wasn't sure if you can do that with a points distributor, but I don't know why not.
     
    sparky, Jun 27, 2008
    #4
  5. Jun 27, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,526
    what EGR ?
    225 never had one.
    did you mean to say vac advance ?
     
    jpflat2a, Jun 27, 2008
    #5
  6. Jun 28, 2008
    motocrazy2006

    motocrazy2006 New Member

    Joined:
    Apr 15, 2008
    Messages:
    10
    the timing im not sure.. it was running bad.. had 2 wires swtiched around. so he pulled the distributor..
    antoehr question. with the points distributor. the cap is number 123456 does that mean for the cylinders or firing order?

    no i mean EGR... its got a EGR valve right behind the carb on the drivers side of the motor. it is a 225 b/c i ran the block numbers and that is what it came back to.

    This thing has been kind of a headace.. but he paid 100 bucks.. 100bucks in parts and i got it to run.. so a $200 4wheeler not to bad. just got to get it to actaully run decent.
     
    motocrazy2006, Jun 28, 2008
    #6
  7. Jun 28, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    That's the order in which you attach the plug wires to the cap.

    Firing order is 1-6-5-4-3-2, which in a circular fashion is 123456. ;)
     
    sparky, Jun 28, 2008
    #7
  8. Jun 28, 2008
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    We need pics of this motor. The 225 never came with a an EGR valve, you may have a later 231 manifold. What carb do you have?
    Maybe a later 225 boat engine.
     
    Mcruff, Jun 28, 2008
    #8
  9. Jun 28, 2008
    motocrazy2006

    motocrazy2006 New Member

    Joined:
    Apr 15, 2008
    Messages:
    10
    ill get some pictures today.. its got a rochester carb on it i believe.
     
    motocrazy2006, Jun 28, 2008
    #9
New Posts