1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

indentions for shovel and axe ?

Discussion in 'Flat Fender Tech' started by trawler Scott, Jan 31, 2008.

  1. Bill F

    Bill F Finally running

    Look behind the passenger seat on the wheel wheel. Let me know if you have a plated attached to the wheel well.
     
  2. Bill F

    Bill F Finally running

    If you have the jeep script then it most likley is an orginal m38 tub
     
  3. trawler Scott

    trawler Scott Member

    There is a plate but it's not readable.I could clean the paint off if it wont mess it up.
     
  4. GaryArf

    GaryArf New Member

    If you got the plate behind the pass. seat I would say from everything else disscussed it's an M38 tub. How about the frame? does it have the Large footman loop looking tiedowns for military transport?
     
  5. trawler Scott

    trawler Scott Member

    No I didnt see any footman loops in another thread I started (that I probably shouldnt have) someone said M38 body on a CJ2A frame.Thanks for the replies so far.
     
    Last edited: Feb 3, 2008
  6. Bill F

    Bill F Finally running

    from other pic it looks like a cj2a frame. The plate behind the pass. seat will have the orginal m38 serial number.