Space enough for Ross steering box?

I'm wondering if the enclosed photo shows enough space for a Ross steering box assembly. As you'll see below there's only about 4" between the mounting plate on the frame and the non-stock clutch slave cylinder and lever. With thanks in advance

 

Hard to tell where the spud shaft would come out at. The box itself would fit (~2" wide), it all depends on the shaft.

 

V6 box/engine; look at the relationship to the frame mounts:

 

Where can I find Ross Steering parts the lever inside my steering box that turns the pitman arm is broke

 

Stickied at the top of this forum:
http://www.earlycj5.com/forums/showthread.php?t=25203

 

prob. try Northstar willys as well. http://www.northstarwillys.com

 

~6"

HTH: