1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I need help finding a Ramsey PTO output shaft seal

Discussion in 'Early CJ5 and CJ6 Tech' started by Maximus78, Jul 17, 2007.

  1. Jul 17, 2007
    Maximus78

    Maximus78 Member

    Brighton, MA
    Joined:
    Jul 31, 2006
    Messages:
    82
    I am trying to rebuild the Ramsey pto on my 5 and I am having no luck finding a new seal for it. The seal that was in there is marked 'Victor 60536'. I haven't been able to find this seal anywhere. Does anyone know of a source for them or have a cross reference to another seal that will work.

    Thanks,
    -Dean
     
    Maximus78, Jul 17, 2007
    #1
  2. Jul 17, 2007
    atuomi

    atuomi rookie

    Smithers, BC, Canada
    Joined:
    May 16, 2006
    Messages:
    34
    I believe that the output seal on the PTO is the same as the input seal on the winch itself (please correct me if i'm wrong!). I have one new in a box (from who knows how long ago) but i'll take a look at it and see if the part # is different, maybe you can use that one to cross reference.

    -edit-

    Well i seem to have lost it, sorry about that.
     
    Last edited: Jul 17, 2007
    atuomi, Jul 17, 2007
    #2
  3. Jul 17, 2007
    lamar

    lamar Member

    greenville sc
    Joined:
    Jan 25, 2004
    Messages:
    327
    herm the overdrive guy more than likely has it.i got my koenig pto seals from him.
     
    lamar, Jul 17, 2007
    #3
  4. Jul 18, 2007
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,539
    Any decent auto parts store should be able to help you out. Especially with a Victor P/N
     
    Posimoto, Jul 18, 2007
    #4
  5. Jul 18, 2007
    Jack Frost

    Jack Frost Member

    Mineral, VA
    Joined:
    Nov 28, 2006
    Messages:
    114
    Herm has a lot of stuff, he'll want model#, maybe a serial. Send him an e-mail. Great guy to deal with.
     
    Jack Frost, Jul 18, 2007
    #5
  6. Jul 18, 2007
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Take this seal to a good auto parts store and they can certainly cross reference. Seals like these are not application specific, heck if nothing else take it to a tractor dealer, they can do it I'm sure.
     
    Mcruff, Jul 18, 2007
    #6
  7. Jul 21, 2007
    polardaddy

    polardaddy New Member

    Olympia,WA
    Joined:
    Jul 17, 2006
    Messages:
    13
    Sorry to partially hijack the thread, but does Herm have a website, or email?
    thanks
     
    polardaddy, Jul 21, 2007
    #7
  8. Jul 21, 2007
    farfle

    farfle old dog

    Mariposa, CA
    Joined:
    May 14, 2007
    Messages:
    430
    farfle, Jul 21, 2007
    #8
  9. Jul 22, 2007
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    Hey, I rebuilt my Ramsey PTO a little while ago. It's the one for a front mount winch but seal is the same.

    victor #60536 = Federal Mogul #450185 (Large seal)
    Federal Mogul #205 (PTO Bearings)
    victor #60120 (Small seals for 3/4" shafts on winches as well as some PTO's)


    Hope that helps.:)
     
    windyhill, Jul 22, 2007
    #9
  10. Jul 22, 2007
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    I'd recommend calling though.
     
    Boyink, Jul 22, 2007
    #10
New Posts