1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

cj6 roll bar

Discussion in 'Early CJ5 and CJ6 Tech' started by blazer, Mar 4, 2007.

  1. blazer

    blazer Member

    question did any 6 come factory with a rollbar that will work in a 66 for a bikini top blazer:flag:
     
  2. sparky

    sparky Sandgroper Staff Member Founder

    There wasn't a factory roll bar in the CJ-6 until at least the Intermediate Jeeps I don't believe.

    But beyond, that the windshield frame application would be unique to the vehicle. Blazer is quite a bit bigger than a CJ.
     
  3. blazer

    blazer Member

    used to have a 72 k5 had to sell due to divorce recently got a 66 cj6 tux with a hardtop and trying to learn more about them. mostly been a chevy guy it does have av6
     
  4. barucker

    barucker Member

    I have a 66 CJ6 tux park myself, mine is # 235 (last digits of the vin). All of them had V6 dauntless. Mine has a home cut down roll bar that defines ugly. I envision a dual hoop bar in the future. One hoop over the front seats, positioned similar to the CJ5, and one over the rear, similar to the five, only measured from the rear, which would leave the bars 20 Inches apart. The rear may get moved back an extra 4-6 inches to better cover the rear seat passengers (2 kids). This will make the angle brace shorter and or steeper, but I think it will look good.

    First things first though. Brakes, steering and springs.
     
  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Agreeing with Sparky, the K-5 bar's hoop will be way to wide for the CJ-6.

    No CJ-6 ever came with a factory roll bar - there was no such thing. Only aftermarket (dealer installed) bars were available. Jeep started offering a roll bar from the factory in '75 ('74?) which was painted body color, but the CJ-6 was surely slated for elimination by then, and never got it.

    The 'official' aftermarket bar's hoop (Smittybilt IIRC) went down to the floor behind the seats, and the braces went rearward to the rear wheel well tops.

    You could probably start with a regular CJ-5 bar on the wheel wells, but it would be ineffective unless you added a front hoop.
     
    Last edited: Mar 5, 2007
  6. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Here's a pic of the Smittybilt bar:

    [​IMG]
     
  7. cj6np435

    cj6np435 New Member

    my cj6 rollbar

    [​IMG]