1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

gas can

Discussion in 'Flat Fender Tech' started by hotrod351, Dec 20, 2006.

  1. Dec 20, 2006
    hotrod351

    hotrod351 Member

    Joined:
    Sep 30, 2006
    Messages:
    225
    my friend has a 53 willys and i would like to mount a 5 gallon jerry can. he has the spare tire mounted on the right rear side and im looking for some insight as where to mount the gas can, he has a tailgate and it looks like the can can might be to wide to mount on the rear corner. any ideas where to mount it. pictures would be helpful.
     
    hotrod351, Dec 20, 2006
    #1
  2. Dec 20, 2006
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Possibly a mount on one of the rear fender wells? Or make a swing out tire carrier that can hold both the tire and a jerry can? That would also move the tire off the side, so if he does any offroading he wont have to worry about hitting it on something...
     
    neptco19, Dec 20, 2006
    #2
  3. Dec 21, 2006
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,845
    1952 M38A1-C had a big gun in the rear, so the gas can mounted just in front of the passenger door, high on the side of the cowl. You could google up some images, no doubt.

    But I second Neptco - here in NH we don't like any extra width to catch on trees.

    Pete
     
    PeteL, Dec 21, 2006
    #3
  4. Dec 21, 2006
    hotrod351

    hotrod351 Member

    Joined:
    Sep 30, 2006
    Messages:
    225
    well if it wasnt for the tailgate id be able to mount the tire carrier and gas can like my m38a1.
     
    hotrod351, Dec 21, 2006
    #4
  5. Dec 21, 2006
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I'd discard the can idea and mount a second tank under the rear floor. Plenty of info available here about that - the stock Jeep tank from later models fits nicely.

    Either that or buy/make a swing-out carrier. Check the members here, or eBay or Willystech, for a used one.
     
    timgr, Dec 21, 2006
    #5
  6. Dec 24, 2006
    Gump

    Gump Old Timer

    Bethel, CT
    Joined:
    Jun 1, 2004
    Messages:
    236
    Sorry it's so blury, but it's just bolted to the gate. This will change after the rebuild, I'm putting bolts where the chains are and adding a rear tire mount.

    [​IMG]
     
    Gump, Dec 24, 2006
    #6
  7. Dec 24, 2006
    hotrod351

    hotrod351 Member

    Joined:
    Sep 30, 2006
    Messages:
    225
    blurry or not, thats what id like to set his jeep up like. he already has the tailgate bolted. but it would be a good idea to mount the spare tire on the back, like your going to do. ill have to talk to him about mounting it back there, besides having everything out of the way it looks better.
     
    hotrod351, Dec 24, 2006
    #7
  8. Dec 24, 2006
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,131
    The M38s had a bolted tailgate that mounted the gas can & spare but they had additional ribs on the inside to handle the load. Discussed here on the CJ3B page. The repro gate I got for Tonk way-back-when actually seems to be a copy of the M38 unit, I can take pics of the reinforcing ribs if you'd like-

    H.
     
    Howard Eisenhauer, Dec 24, 2006
    #8
  9. Dec 24, 2006
    Sledgehammer

    Sledgehammer Sure, I'll try it

    Ellery, Il
    Joined:
    Jun 7, 2006
    Messages:
    341
    Good question. I have been wondering where to put mine as well. That link to the 3b page has some good info on it.
     
    Sledgehammer, Dec 24, 2006
    #9
  10. Dec 25, 2006
    Gump

    Gump Old Timer

    Bethel, CT
    Joined:
    Jun 1, 2004
    Messages:
    236
    As Howard said, also on the CJ2A Page some one showed, maybe 3" or 4" X 3/16" (guessing) strips on the inside of the tailgate to distribute the weight. www.walcks4wd.com has the tire mounts as well as Beachwood.
     
    Gump, Dec 25, 2006
    #10
  11. Dec 25, 2006
    BruceW

    BruceW RR__ Buckaroo

    Northeast Colorado
    Joined:
    Feb 4, 2004
    Messages:
    20
    I had spare 7.50/16 & gas can mounted on a repro M38 gate on my 3B, gate bolted, all that--- pulled the RR corner of the body loose from the inner fender. I now have a swing-away mount that carries not only the spare & can, but ax & shovel as well. Mounts to the X-member with the hitch. BW
     
    BruceW, Dec 25, 2006
    #11
New Posts