Dist. vacuum advance hose?

OK again I was fiddling with my 225 when I noticed that the vacuum advance hose was off. From the distributor where does it go?

:v6: :?

 

thats what i thought! Where?

 

On the rochester 2g the vac advance hose goes to the port on the pass side of the carb just below the fuel inlet. This vaccum will not change advance at idle because the circuit for that port is designed for throttle response advance. If you hook the vaccum advance to a port that has vaccum all the time it will advance the distributor timing all the time instead of when needed.
http://new.photos.yahoo.com/chris_kolar/album/576460762318294655/photo/294928803198726584/7
Here is a picture the hose is there just below the fuel inlet. If this is not clear enough lmk. k
chris

 

Ok I found a good clean pic of a 2g that is off of a truck. The fuel inlet is pointed to the front is different but the location and angle of the vaccum port for the distributor vaccum hose is right.
http://new.photos.yahoo.com/chris_kolar/photo/294928803199651088/0

 

Here is a pic of a 69 v6 engine pass side view.
http://i2.ebayimg.com/05/a/08/99/15/91_4.JPG

 

Here is another pic of my 2G on my 225. The fuel line has been removed and you can see the vaccuum line still attached to the carb.

http://www.earlycj5.com/gallery2/v/picBank/album_004/Roch+2G/DSC_1497a.JPG.html

Jim