1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

summit roll cage

Discussion in 'Early CJ5 and CJ6 Tech' started by crujones, Sep 14, 2006.

  1. crujones

    crujones New Member

    I need to put a cage in my cj5 and was wondering if anyone had ordered hoops or ful cages from summit. There prices are cheap and they look decent. I have access to a welder so I was wondering if anyone one has used them what part numbers and or sizes you ordered and how they came out. Any info is appreciated.
    Thanks Jesse
     
  2. Mcruff

    Mcruff Earlycj5 Machinist

    I don't see one listed for jeeps. 4wd hardware has them though and they are priced about the same as some of the other hoops Summit has.
     
  3. crujones

    crujones New Member

    thanks for the heads up does anyone have experiance with those?
     
  4. crujones

    crujones New Member

    Okay so I checked 4wd hardware and couldn't find any cages for a 62 they are all 79 or later model. and the prices are a lot higher than summit. Does anyone have other suggestions or should I just get one made. I can weld it I just need the bends made and the notching.
     
  5. karlvin08

    karlvin08 I R SMRT

    jegs.com has one they list for '61-'86 cj-5 and cj-7. dont know how it fits both, it must be a good deal of cusomizing to install it.
     
  6. 71CJ%

    71CJ% New Member

  7. OrangeCJ5

    OrangeCJ5 Sponsor

    I ordered the one from 4wd hardware and it fits great, no interference with the softtop or dash, headlight switch is a little obstructed but it's no big deal.
     
  8. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Freight is a killer on these bars and hoops because of the oversize package dimensions... freight is sometimes more than the product! :mad:

    Got anyone near you that builds race cars/sprint cars, etc? Those guys often have tubing benders and may build you a front hoop...
     
  9. crujones

    crujones New Member

    Yea my brother inlaw actual raced dirt track for a while and has some conections I think thats the rout I am going to take.
     
  10. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    If that doesn't work out, I know some Jeepers over near Rochester that might be able to find something...
     
  11. crujones

    crujones New Member

    Okay thanks could they help me out by building it or might have some?
     
  12. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Not sure. I'll look into it. You need a full cage or just a front hoop to attach to an existing cage?
     
  13. speedbuggy

    speedbuggy Looking for a Jeep now

    Check with a local speed shop. They'll take care of you ;)
     
  14. JeepTherapy

    JeepTherapy Sponsor

    I got a 4wd hardware front hoop with my jeep when I bought it. I like the look of the retro cages a lot better than the new fangled jungle gym looking things. I am sure the jungle gym will be a lot stronger in a roll over, but I am OK with that. I took that front hoop and used the spreaders that came with it for the basic cage. I added the sched 40 pipe and some other old roll bar material I had to make the rest of the seat mounts.

    [​IMG]

    [​IMG]
     
  15. danjanent

    danjanent New Member

    I just bought a front hoop with 4bars front to rear from tennessee off road www.tennesseeoffroad.com but because i travel i picked them up freight was scary high they were deseigned to fit 55thru 71cj5 and cj7 takessome cutting to fit cj5 they are 2" by 120 wall oh i havent put em in yet but every thing seems to match up good u might try these guys every place i tried said the same thing they either dont make em for cj5 or freight is outragous