1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can't find timing marks

Discussion in 'Early CJ5 and CJ6 Tech' started by RWO101, Jun 14, 2006.

  1. Jun 14, 2006
    RWO101

    RWO101 New Member

    Deming, NM
    Joined:
    Jun 14, 2006
    Messages:
    1
    I have a 225 and I cannot see the timing marks on the block. I have repalaced all the tune up stuff and rebuilt the carb. It turns over, and acts like it wants to fire but won't. Any help would be appreciated. Also will a Holley 2209 2bbl fit to repace my Rochester 2G?
     
  2. Jun 14, 2006
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    the timing marks are on the driver's side of the front cover. they might be covered in paint.
     
  3. Jun 14, 2006
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Might look like this: (unless somebuddy stole the tab with the degrees on it)
     
  4. Jun 14, 2006
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    I though the timing marks on a 225 was casted into the cover? Doesn't the 231 have a bolt on timing mark bracket?
     
  5. Jun 14, 2006
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Uh-oh. Is this my week for surprises? I was thinking I had checked the block ID; maybe I better look again...............
     
  6. Jun 14, 2006
    lorne

    lorne Ummm...

    Fremont, CA
    Joined:
    Sep 23, 2002
    Messages:
    58
    I don't have the bolted on timing mark on my '69 225 - it's cast into the cover as Scott suggested.

    I remember the first time I tried to time mine, I marked it with chalk, fired it up and held the timing light and couldn't see a thing. Started turning the distributor by sound and then the mark came into view. Turned out she was so far out of time, the mark wasn't even in the range when the light went off. It didn't run or sound like it was that far off - boy was I surprised.

    lj
     
  7. Jun 15, 2006
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Not trying to beat dead horse, but, the casting numbers on my block are DRH 115, which, according to the FSM are Domestic 1969 V6-225 9.0 C.R. (2 Bbl Carb)............. I really don't know anything about any of it, so if I'm wrong again (pretty common), I have way more to learn than I had planned on when I bought this little jewel.
     
  8. Jun 15, 2006
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Casting number on the block has nothing to do with the timing cover, it could have been swapped at anytime. The factory timing cover for a 225 has the timing marks cast into the housing.
     
  9. Jun 15, 2006
    Steamer

    Steamer Thick and gritty!

    SW OR
    Joined:
    Oct 17, 2004
    Messages:
    389
    Geez, it just gets better. Thanks for the info, Mike. Got a sinking feeling I just might have a JEEP for sale this year.............. More aggravation than I need. I thought I was gonna clean up a poor negelected little fella, and get a V-6 to play with in the process. Well, yeah, got that right!!! Or maybe it'll just sit this summer, and I'll kiss up to my 61. See if I'm forgiven and all...........
     
New Posts