1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wheel stud issues

Discussion in 'Early CJ5 and CJ6 Tech' started by bkcraun, Apr 15, 2016.

Page 2 of 2
  1. Apr 18, 2016
    Arnold Layne

    Arnold Layne Member

    Joined:
    Oct 6, 2013
    Messages:
    217
    MoPar used them up until about '70.
     
    Arnold Layne, Apr 18, 2016
    #21
  2. Apr 18, 2016
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,882
    Wheel studs are probably a 1 on a scale of difficulty. They knock in and out very easily. If you use a brass drift the threads wont be damaged if you are going to re-use a stud as when you swap a rotor off of the bearing hub on a Dana 30.
     
    Daryl, Apr 18, 2016
    #22
Page 2 of 2
New Posts