Third go around for the Jalopy

The flares are plastic Bill. Thinking about bending some sheet metal to fill the gap and with to the body.

Got the wheelhouse notches done today. I would love to get to fixing the floors, but the rotisserie is occupied.

 

Installed my "beer stash" compartment today. I found a cooler that will fit in the toolbox lid no problem. http://www.igloo-store.com/detail/IGL+LEGEND+12+CAN

 

That's pro work indeed. Bravo.

 

Thanks!

 

Got a lot done this weekend. I rebuild the transfer case a few weeks ago and found that the front output shaft was snapped. Had to wait for that to come it to finish the rest. I put that all back together yesterday and in. Then I cut out the rest of the floor rot, tacked in some patches and built some new floor supports. I put the body on the frame to see how it looked. I'm really happy with it.

 

Diamond in the rough eh

 

Oh yeah, still LOTS of fabbing to do. I put the body on so there was weight on the suspension so I could set the pinion angles.

 

Today I'll be pulling it back apart for paint. I did its final trail ride yesterday.

 

Looks like fun Nate, keep up the good work!

 

three flatties . I see a sickness there . nice work

 

they look GREAT!..ost excellent work...

best of karma to you on your new endeavors!

 

Thanks guys!

I have 3 3As, so I have fulfilled that requirement. Now I need 2 2As, 5 CJ5s and 6 CJ6s.

Body is now on the rotisserie. Just some welding and grinding, and I can send it out to get sand blasted.

 

That Jeep could make a grown man cry.. That is just the coolest.. I gotta say man, I am truly jealous of that rig..