1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

plow parts

Discussion in 'Early CJ5 and CJ6 Tech' started by monster, Nov 4, 2014.

  1. Nov 4, 2014
    monster

    monster New Member

    Joined:
    Nov 2, 2014
    Messages:
    9
    I have a 64 cj5 with a plow,I need parts for the hydro pump*

    its a hy-lo- jeep ,,,monarch road machine grand rapids,mi

    UHT 31492


    there is four springs on the control valves,up/down,,left/right

    I think called return position springs or extenison springs,,(not sure)

    possibly SA-9 or SAJ/w19 (once again i am unsure)

    please help me
     
    monster, Nov 4, 2014
    #1
  2. Nov 4, 2014
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,426
    I just went to the hardware store and got some that fit. Measure the distance from the lever to spring mount when it is pulled or pushed. You want just a little shorter than the shortest distance so they have enough tension to stay on.
     
    termin8ed, Nov 4, 2014
    #2
  3. Nov 4, 2014
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,144
    Welcome :)

    These pumps have been discussed here quite a few times, you may find some of these posts helpful

    H.
     
    Howard Eisenhauer, Nov 4, 2014
    #3
  4. Nov 4, 2014
    monster

    monster New Member

    Joined:
    Nov 2, 2014
    Messages:
    9
    I have tried some different springs..they break and so not last..I am hoping to find the correct ones
     
    monster, Nov 4, 2014
    #4
New Posts