Fuel filler bezel?

Hey all- I am having a hell of a time finding a bezel for my fuel fill. All that is there right now is the hose and a piece the cap threads into. But no bezel or anything else in the hole rear of the tub. I assume there is something else out there like this that fits our intermediate Jeeps?

http://www.rakuten.com/prod/crown-a...s&adid=18179&gclid=CPbMxt2lp70CFUWVfgodaWUAEg

 

it should only be a rubber groment around filler tube and hole in body
http://www.ebay.com/itm/261323501849?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

Awesome! Thanks Twin. I saw that on E-bay, but I figured that couldn't be it. Glad to hear it is.

 

Excellent! Thanks. I take it that's from the FSM? I need to get one, bad. All I have right now is the Chilton, and as I've found in the past, it's lacking...

 

The parts manual shows both part number 663502 (FMT) and 654758 (RMT). I suspect the 654758 (RMT) would be correct for an intermediate. I think RMT stands for rear mount and FMT stands for front mount but I'm no expert. The one Twin2 linked may be for the underseat tank.

 

The picture is from the parts manual for intermediate Jeeps. It's correct for 73-77 only. 70-72 has different plumbing, and 78-on is a different filler design. 4.141-16a is a rubber grommet.

The FSM has a pretty good but different picture of the fuel tank system, without the index numbers. The pic above is typical of the illustrations in the parts book.

You want PN 654758 for rear mount tank. Any Jeep parts retailer should have the grommet: http://midwestjeepwillys.com/jeep-willys-fuel-filler-pipe-grommet.html