1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1963 CJ5 Seats

Discussion in 'Builds and Fabricators Forum' started by ezdays74, Mar 4, 2014.

  1. Mar 4, 2014
    ezdays74

    ezdays74 New Member

    Joined:
    Mar 4, 2014
    Messages:
    4
    I am working on restoring a 1963 CJ5 which I have had for the last 25 years. In part of the project, I am replacing the seats, and have purchased the Rugged Ridge standard low back seats - seen here http://www.ruggedridge.com/low-back-replacement-bucket-seat-black-55-86-jeep-cj-models.html . The problem I am having is the mounting brackets/seat frame for the above the gas tank mounting, etc seem to be built into the old seats and not just a bracket that can be put on. Has anyone had any experience with this? Rugged Ridge suggested trying this, but would need to be modified due to the under seat tank - http://www.ruggedridge.com/driver-side-fold-forward-seat-riser-bracket-76-95-jeep-cj-wrangler.html . Please share any ideas you might have!
     
    ezdays74, Mar 4, 2014
    #1
  2. Mar 4, 2014
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,134
    What you need are the post-64 seat mounts, these were designed for the "Boseman"(?) bucket seats which are very close to the aftermarket seat designs.

    [​IMG]


    [​IMG]

    [​IMG]


    These things come up frequently here & on ebay- try a wanted ad in the classifieds.

    *DON"T* cut up the originals- those are in very short supply & worth $$$.

    H.
     
    Howard Eisenhauer, Mar 4, 2014
    #2
    Mark T. likes this.
  3. Mar 4, 2014
    USMC 0369

    USMC 0369 In the slow lane.

    Fallbrook, CA
    Joined:
    Dec 12, 2013
    Messages:
    27
    I have a set from my old '74 I will be listing on my for sale thread very soon. I like to think I'm fairly reasonable.

    ~Nick
     
    USMC 0369, Mar 4, 2014
    #3
    JeepRebel likes this.
  4. Mar 4, 2014
    ezdays74

    ezdays74 New Member

    Joined:
    Mar 4, 2014
    Messages:
    4
    Thanks so much for the reply! I was really considering cutting up the originals, but now I won't. Guess I need to get the dimensions off the old and new ones and see..... I can pretty much bolt into the jeep anywhere, but would obviously prefer not making a bunch of new holes.
     
    ezdays74, Mar 4, 2014
    #4
  5. Mar 4, 2014
    ezdays74

    ezdays74 New Member

    Joined:
    Mar 4, 2014
    Messages:
    4
    I would be very interested in them. Do you know what the spaces between the seat mounting holes are and what the rough dimensions are?
     
    ezdays74, Mar 4, 2014
    #5
    Mark T. likes this.
  6. Mar 5, 2014
    USMC 0369

    USMC 0369 In the slow lane.

    Fallbrook, CA
    Joined:
    Dec 12, 2013
    Messages:
    27
    I'm assuming this was for me?

    I will measure tonight as I pull them from the old seats. :)
     
    USMC 0369, Mar 5, 2014
    #6
  7. Mar 5, 2014
    ezdays74

    ezdays74 New Member

    Joined:
    Mar 4, 2014
    Messages:
    4
    Super!
     
    ezdays74, Mar 5, 2014
    #7
  8. Mar 5, 2014
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,134
    FYI in the pics those are 1" square grid lines.

    The spacing on the mounting holes is the same as the '55-'63 one piece seats, they're fully interchangeable.

    FYI please keep all offers to buy/sell either in the classifieds or in PMs, as we don't like to see money discussions in the tech sessions.

    H.
     
    Howard Eisenhauer, Mar 5, 2014
    #8
  9. Mar 5, 2014
    USMC 0369

    USMC 0369 In the slow lane.

    Fallbrook, CA
    Joined:
    Dec 12, 2013
    Messages:
    27
    Apologies. I'm just breaking all the rules huh?

    REBEL!!!
     
    USMC 0369, Mar 5, 2014
    #9
New Posts