1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Help Identify this heater

Discussion in 'Early CJ5 and CJ6 Tech' started by Fiddy5cj5, May 5, 2013.

  1. May 5, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
  2. May 6, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    Doesn't look like anything factory or otherwise that I have seen.........what does the base look like?
    I assume there is a place for the Hot Air to get into the cab?
     
  3. May 6, 2013
    68BuickV6

    68BuickV6 Well-Known Member

    Hesperia, CA.
    Joined:
    Mar 12, 2012
    Messages:
    2,161
    Looks kinda cobbled together....
     
  4. May 6, 2013
    culls

    culls Member

    Joined:
    Aug 1, 2012
    Messages:
    132
    Is there any ductwork under the cab? And if so, can you get a picture of it?
     
  5. May 7, 2013
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,510
    That does appear to be a home brewed version. If you are going to use it, it would likely benefit greatly from a cover and duct to the grill area as the existing arrangement is going to be sucking quite a bit of dust. At least the rodents can't get too far into that systemR)
     
  6. May 7, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
    Thanks for the replys everyone ill get out to the shop today and snap a few more pics of the setup
     
  7. May 7, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
  8. May 7, 2013
    68BuickV6

    68BuickV6 Well-Known Member

    Hesperia, CA.
    Joined:
    Mar 12, 2012
    Messages:
    2,161
    Can you get those pictures any bigger? They're a bit small.
     
  9. May 7, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
  10. May 7, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
    Haha! I figured out to do tap free lol
     
  11. May 7, 2013
    68BuickV6

    68BuickV6 Well-Known Member

    Hesperia, CA.
    Joined:
    Mar 12, 2012
    Messages:
    2,161
    That doesn't look *too* bad.
     
  12. May 7, 2013
    tarry99

    tarry99 Member

    Northern California
    Joined:
    Oct 29, 2012
    Messages:
    3,784
    :)Still looks like something that someone put together from who knows what parts! The fan motor looks GM or Jeep. The inside duct / tube and I only see one looks like its cut open on the bottom to feed the floor I guess? Nothing going to the windshield for defrost ???...........If it works......and gets some hot air where you want it..........Go for it!

    Point is there is not a lot of options for heat in the early Jeeps.........the original heater system if you have one on the drivers side is at best questionable in its performance, although some folks find them suitable. There are some aftermarket options that do blow hot air but have no decent plumbing system to get the air where and when you want it...........Truth is Jeeps are Jeeps and many will argue they should not be comfortable.....................until you get old!
     
  13. May 7, 2013
    Fiddy5cj5

    Fiddy5cj5 Member

    Ft bliss
    Joined:
    May 4, 2013
    Messages:
    108
    Well I'm not old yet no matter how old the army makes me feel lol but it was in the jeep when I got it so I figured I would try and see what it was from so ill prolly try and get it to work and if it does work so be it and if it doesn't then ill just rip it out
     
New Posts