1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Driver side floor photo

Discussion in 'Early CJ5 and CJ6 Tech' started by GunTroll-6'r, Oct 6, 2012.

  1. GunTroll-6'r

    GunTroll-6'r Member

    What does a correct original driver side floor look like around the clutch and brake area. I have a 70.

    The PO did some moding. I'd like to get it right without the rigging.

    Need a photo please.
     
    GunTroll-6'r, Oct 6, 2012
    #1
  2. supertrooper

    supertrooper Member

    [​IMG]
     
    supertrooper, Oct 6, 2012
    #2
  3. GunTroll-6'r

    GunTroll-6'r Member

    Hey thanks!

    One more question

    When finished how are the holes that the cutch and brake pedal pass through "sealed" ?

    Again the PO did some rigging to attempt to stop drafts but it looks horrible.
     
    GunTroll-6'r, Oct 7, 2012
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Howard Eisenhauer, Oct 7, 2012
    #4
  5. GunTroll-6'r

    GunTroll-6'r Member

    I've seen those, just curious how it looks properly installed and based off of a proper image, if I can get mine there from what I have now.
     
    GunTroll-6'r, Oct 7, 2012
    #5
  6. noahlon

    noahlon Old Fart

    [​IMG]

    Here's my '68
    Don't have the pass thru seals installed.
     
    noahlon, Oct 7, 2012
    #6
  7. 1960willyscj5

    1960willyscj5 Well-Known Member

    There is also supposed to be some kind of light spring that holds the pads away from the 90ยบ bend in the pedal arms.
     
    1960willyscj5, Oct 7, 2012
    #7
  8. GunTroll-6'r

    GunTroll-6'r Member

    What do these look like? Been googling but not finding it.
     
    GunTroll-6'r, Oct 8, 2012
    #8