1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

74 CJ5 Heater/Defrost/Fan Controll Bracket Mounting Hardware

Discussion in 'Intermediate CJ-5/6/7/8' started by The Wizard, Feb 19, 2012.

  1. Feb 19, 2012
    The Wizard

    The Wizard Member

    Colorado...
    Joined:
    Jul 12, 2005
    Messages:
    179
    I am trying to be as close to factory orginial as I can get. The parts manual just calls it "screw, tapping". Can anyone tell me what kind/size/head type of "screw, tapping" I need?
     
    The Wizard, Feb 19, 2012
    #1
  2. Feb 19, 2012
    Gigem1983

    Gigem1983 Member

    Ft Worth, Texas
    Joined:
    Feb 21, 2010
    Messages:
    55
    My 75 uses a 3/8" hex head screw on each side that screws directly into the dash flange.
     
    Gigem1983, Feb 19, 2012
    #2
  3. Feb 20, 2012
    DREDnot

    DREDnot Not new to JEEPS

    AZ
    Joined:
    Feb 7, 2010
    Messages:
    646
    Mine has large round head phillips screws about a half inch long.
    Not sure if they are original,though.
     
    DREDnot, Feb 20, 2012
    #3
  4. Feb 20, 2012
    deerslayer

    deerslayer New Member

    ELKIN N.C
    Joined:
    Nov 21, 2010
    Messages:
    14
    My 75 is like this also
     
    deerslayer, Feb 20, 2012
    #4
New Posts