1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

FYI: Auburn Pro Dana 44 limited slip at overstock diff parts on sale.

Discussion in 'Early CJ5 and CJ6 Tech' started by Mike C, Dec 23, 2011.

  1. Mike C

    Mike C Member

    Last edited: Dec 23, 2011
    Mike C, Dec 23, 2011
    #1
  2. scott milliner

    scott milliner Master Fabricator

    Not sure if that will work for the two piece axle Dana 44. And I know for a fact that a Detroit Locker will not.
     
    scott milliner, Dec 24, 2011
    #2
  3. Glenn

    Glenn Kinda grumpy old man Staff Member

    Interesting. I'm sure Nickmil can give us some good info on this.
     
    Glenn, Dec 24, 2011
    #3
  4. Mike C

    Mike C Member

    I don't think they made a 19 spline that was not two piece? Maybe they did for other manufacturers. The thrust block would be the reason so a call to R&P might be in order.
     
    Mike C, Dec 24, 2011
    #4
  5. nickmil

    nickmil In mothballs.

    Yeah, it all hinges on whether there is a thrust block or not. Jaguar used 1 piece 19 spline axles as did a couple other manufacturers. I think Studebaker did too. I'd definitely find out for sure before ordering one.
     
    nickmil, Dec 24, 2011
    #5