1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Throw out bearing help

Discussion in 'Early CJ5 and CJ6 Tech' started by PieLut, Jul 21, 2011.

  1. PieLut

    PieLut Member

    Just purchased a Sachs 10.5" clutch kit for my 66 CJ5 :v6:, T-18 1.125" diameter 10 spline shaft. The pilot bushing is correct, but the new throw out bearing is
    0.260" taller. The I.D. of the bearing is the same at 1.377" and the diameter where the clutch fork attaches to is also the same. Do I need to find a shorter throw out bearing? Thanks, Jonah

    [​IMG]
     
    PieLut, Jul 21, 2011
    #1
  2. Patrick

    Patrick Super Moderator Staff Member

    The new one is the correct bearing for a stock Dauntless..
     
    Patrick, Jul 21, 2011
    #2
  3. madgician

    madgician New Member

    the rollers come off, so you can use either of the carriers you want too.
     
    madgician, Jul 21, 2011
    #3