1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T350 and Early T400

Discussion in 'Builds and Fabricators Forum' started by iagmc, Apr 24, 2011.

  1. iagmc

    iagmc Member

    The T400 in the late Jeeps Commandos had the AMC T400 (GM) Just wondering how different these would be from the T350 on the tail shafts. Could you mount the factory D20 adapter to the T350 with suttle changes, or would it be pounding a square peg in a round hole?
     
    iagmc, Apr 24, 2011
    #1
  2. avmechanic

    avmechanic Gearhead

    Completely different. Even worse than pounding a square peg in a round hole. The most they have in common off the top of my head is that they are 3 speeds and are from GM. If I remember right, I think the torque converters are interchangeable as well.
    Greg
     
    avmechanic, Apr 25, 2011
    #2
  3. iagmc

    iagmc Member

    Thank you, never taken apart the auto's, so i had no idea.
     
    iagmc, Apr 25, 2011
    #3
  4. nickmil

    nickmil In mothballs.

    as was said, lots of differences. The adapter from a th-400 won't work on the Th-350 as the bolt pattern is different. 6 for the 400 and 4 for the 350. Output shaft is different as well.
     
    nickmil, Apr 25, 2011
    #4