1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Firewall

Discussion in 'Early Jeep Restoration and Research' started by Montana Brown, Nov 10, 2010.

  1. Montana Brown

    Montana Brown cowboy shooter

    Does anyone have a picture of a factory 1971 firewall layout. My firewall is 100% stock and I'd like to run everything back where it belong. I don't have pics because I bought this jeep as a basket case.
    Any help would be great.

    Thanks
     
    Montana Brown, Nov 10, 2010
    #1
  2. panzer

    panzer Super Mod Staff Member

    panzer, Nov 10, 2010
    #2
  3. wmunny

    wmunny Member

    [​IMG]


    [​IMG]


    couple of 71's
     
    wmunny, Nov 10, 2010
    #3
  4. Montana Brown

    Montana Brown cowboy shooter

    Thanks guys,

    I also need a shot of the drivers side beside the heater box where the e/brake comes thru. I have 3 holes on that side. One is 1 1/4 inches and the other two are 3/4 inches.

    I figure one is for the e/brake and one of the others is for the heater box baffle control cable. Don't have a clue on the other.
     
    Montana Brown, Nov 10, 2010
    #4
  5. nickmil

    nickmil In mothballs.

    I believe the other is for the windshield washer hose. Hose goes from the reservoir bag on the fender through the firewall, to the pump on the dash, then to the nozzle on the cowl.
     
    nickmil, Nov 11, 2010
    #5
  6. wmunny

    wmunny Member

    [​IMG]
     
    wmunny, Nov 11, 2010
    #6