1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Farm Attachments.

Discussion in 'Early CJ5 and CJ6 Tech' started by pete60cj5, Jul 14, 2010.

  1. pete60cj5

    pete60cj5 New Member

    hello all, i'm new here. i joined to get more info on my jeep. it also has the farm attachments. Koenig front pto winch, rear pto, 3-pt hitch, Stratton lift, Myers 4-way plow. it's a 60 cj5. all seems to be dealer installed. it's the same setup as Rich. does anyone know how i could get in touch with him to swap info. any help here would be appreciated! i'll post some pics when i can. Thanks All! take care pete
     
  2. lhfarm

    lhfarm Sponsor

    Pete,
    Send me a PM and I may be able to help. In the mean time, I do hope you will post some pictures.

    Barry
    www.farmjeep.com
     
  3. pete60cj5

    pete60cj5 New Member

    Hello Barry, Posted some pics in an album, take a look.

    Pete
     
  4. jd350rba

    jd350rba New Member

    pete send me an email jd350rba@live.com we can discuss the cj5 farm jeep thanks Rich
     
  5. jd350rba

    jd350rba New Member

    where could i find the photo's of your farm jeep? any over drive ? govenor?
     
  6. pete60cj5

    pete60cj5 New Member

    hey Rich, i put up some pics in an album. jeep dosen't have O/D or a govenor. only the goodies i mentioned. :beer:
     
  7. unclebill

    unclebill Banned

    can we see the photos too?
    you could use photobucket like the rest of us.
     
  8. sparky

    sparky Sandgroper Staff Member Founder

  9. unclebill

    unclebill Banned

  10. sparky

    sparky Sandgroper Staff Member Founder

    It's ok. R)
     
  11. unclebill

    unclebill Banned


    yep short bus bill they call me...
     
    Last edited: Jul 17, 2010
  12. mpsvn

    mpsvn New Member

    Hi Pete,
    I also just picked up a 56 - 60 (abandoned on a ranch 30 years ago) cj5 which has keonig front pto winch and rear pto. -- no attachments though - just remnants with lots of brackets and heavy-duty welding. I'd like to talk with you and compare notes.

    1) how is the exhaust routed and where is the muffler?
    2) where is the hydraulic pump-- is it driven off fanbelt by the engine or?
    2) I would be interested in seeing more details on the 3 pt hitch (as I'd like to add one to mine). Frankly I really want to add to add an auger, but.

    you can send email direct to me at emnov@comcast.net if you wish - thanks, Mike N.
     
  13. lhfarm

    lhfarm Sponsor

    We have a Stratton brochure here http://home.comcast.net/~lhfarmbt/stratton/ I'm assuming the control between the seats is a custom job that allow for switching between the lift and the front plow.

    I'd like to see a shot of the engine compartment for the location of the reservoir and pump. The brochure shows what appears to be a Monroe crankshaft driven pump. But this is on a flat fender and I know a lot of belt driven Monarch pumps were used in later years.

    Thanks for sharing the pictures.

    Thanks,
    Barry
    www.farmjeep.com