1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Gas Gauge Question

Discussion in 'Early Jeep Restoration and Research' started by MA74CJ5, May 23, 2010.

  1. MA74CJ5

    MA74CJ5 Member

    From what I have seen original gas gauges (stewart warner) have the E on the right and F on the left of the face and the after market gauges have the E and F reversed.

    Well I have a gauge that came from an original speedo head and is made by Stewart Warner that has the E on the left and F on the right. Has anyone run across this?

    The gauge works and I am going to use it but I am just confused by the layout and I also want to make sure that the pin layout on the back of the gauge is the same a standard OEM gauge.

    Thanks.
     
    MA74CJ5, May 23, 2010
    #1
  2. pathkiller

    pathkiller Member

    Stock Stewart Warner gauges on my 74 have F on the left and E on the right. All the replacements I've seen have the reverse pattern. Stock gauge on my 82 Scrambler has E on the left and F on the right.
     
    pathkiller, May 24, 2010
    #2
  3. MA74CJ5

    MA74CJ5 Member

    Hmmm. So I guess the layout is not set in stone like I suspected it was. Anyway I had a temp gauge and a fuel gauge in the spare parts box but the temp gauge has the H and C layout the opposite of the Fuel. Don't care though I am using it anyways it will work just look funny..
     
    MA74CJ5, May 26, 2010
    #3