1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey, but which winch?

Discussion in 'Early CJ5 and CJ6 Tech' started by one2manyjps, Feb 24, 2010.

  1. one2manyjps

    one2manyjps Member

    Can anyone ID the model of this winch?
    It is on a M170 I've been looking at.
    Would like to know if parts are available before purchase.:)
    Thanks, Bob in Arkansas
    [​IMG]

    [​IMG][​IMG]
     
    one2manyjps, Feb 24, 2010
    #1
  2. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Wow, that's an oldie.

    I've never seen a picture of one like that on the Ramsey web site but it wouldn't hurt to send them a pic & ask. i would suspect that outside of the gear set or clutch parts that the bearings & seals would be stock catalog stuff available through any supply house.

    H.
     
    Howard Eisenhauer, Feb 24, 2010
    #2
  3. kaiser_willys

    kaiser_willys Well-Known Member

    I had one that looked like it alot, well almost identical only difference i see is mine ran directly off of the crankshaft, gave it away. pull the fill plug out and inspect the condition of the bull gear and if you can see it work check that the shaft that goes thru the drum isnt bent, should be no clutch parts in that one just the gear set and 2 bearings on the worm gear shaft, rest are brass bushings. cant see it in the picture but i would bet it has a band style brake on the passanger side with a lever to hold it
     
    kaiser_willys, Feb 24, 2010
    #3
  4. kaiser_willys

    kaiser_willys Well-Known Member

    driver side of the drum has been broken:rofl:
     
    kaiser_willys, Feb 24, 2010
    #4
  5. JohnyJeep

    JohnyJeep BLOWING A XING NEAR U@2AM

    The PTO looks like one I have for sale

    [​IMG]

    [​IMG]
     
    JohnyJeep, Feb 24, 2010
    #5
  6. Vanguard

    Vanguard Take Off! Staff Member

    Vanguard, Feb 24, 2010
    #6
  7. one2manyjps

    one2manyjps Member

    PT1-J on the pto, but an antique winch... Boy! :rofl: At least it does work.

    Thanks for the suggestions and that's what I will do.
    Bob
     
    one2manyjps, Feb 24, 2010
    #7
  8. kaiser_willys

    kaiser_willys Well-Known Member

    for what its worth, my winch had the numbers stamped in to the alumnium housing, may clean it up and find them
     
    kaiser_willys, Feb 24, 2010
    #8