1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

pilot bushing depth on 225 v6

Discussion in 'Early CJ5 and CJ6 Tech' started by mxdigger, Sep 25, 2009.

  1. mxdigger

    mxdigger Member

    quick question: does anyone know if there will be any problem if my pilot bushing is about 1/8" from being flush to the crank. ive driven it in as far as i can and it doesnt seem to want to go any further. i drove it in completely straight so i know its not crooked....it just doesnt seem to wanna drive in any more.
    thanks,
    dustin
     
    mxdigger, Sep 25, 2009
    #1
  2. jpflat2a

    jpflat2a what's that noise?

    sounds good to me
    as long as the pilot shaft goes in smoothly
    most of the Jeep trans have an extra long pilot tip on the end of the shaft anyway.
     
    jpflat2a, Sep 25, 2009
    #2
  3. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Yep-- X2 -- You will ge good with that.
     
    Walt Couch, Sep 25, 2009
    #3
  4. cj6/442

    cj6/442 Sponsor

    I think it should work :)
     
    cj6/442, Sep 25, 2009
    #4