1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Alternator bracket for f134

Discussion in 'Early CJ5 and CJ6 Tech' started by tcfeet, Jun 13, 2009.

  1. tcfeet

    tcfeet Member

    I'm replacing the generator with an alternator. Can someone
    post a picture of the bracket needed' or tell me what to build?
    It's a 64 cj5 with a 4 cylinder. Thanks
     
    tcfeet, Jun 13, 2009
    #1
  2. w3srl

    w3srl All-around swell dude Staff Member

    [​IMG]

    Here's the one you need, the A-200. It runs about $33 from www.alternatorparts.com

    They also have the wide-groove pulley you will need in order to mate the alternator up to everything else. ;)
     
    w3srl, Jun 14, 2009
    #2
  3. tcfeet

    tcfeet Member

    Thanks Steve,
    That will get me going.:)
    Tom
     
    tcfeet, Jun 14, 2009
    #3
  4. dohc281

    dohc281 It is what it is.

    dohc281, Jun 14, 2009
    #4
  5. mullen46cj2a

    mullen46cj2a Member

    A '55 CJ5 with 4 cyl just followed me home and it has an alternator in place. I will be restoring back to generator. I would be interested in a swap. PM me if you are interested and I can email pics of what I have.
     
    mullen46cj2a, Jun 14, 2009
    #5
  6. panzer

    panzer Super Mod Staff Member

    That's where I got mine about 5 years ago.

    Since then I had Mike (Mcruff) build me one. Here are
    the drawings.
    [​IMG]
     
    Last edited: Dec 22, 2009
    panzer, Jun 15, 2009
    #6
  7. unclebill

    unclebill Banned

    panzer
    does everything line up just right?
    i have the complicated looking one at the top of this thread.
    and would like to eliminate weak links if possible.
    less parts
    less failure points.
     
    unclebill, Jun 19, 2009
    #7
  8. panzer

    panzer Super Mod Staff Member

    Yep. The holes line up w/ the plate on the F-134. Bolts right up.
     
    panzer, Jun 19, 2009
    #8
  9. unclebill

    unclebill Banned

    cool thanks!
     
    unclebill, Jun 19, 2009
    #9
  10. panzer

    panzer Super Mod Staff Member

    panzer, Jun 19, 2009
    #10
  11. tcfeet

    tcfeet Member

    Panzer,
    What about the alternator brace and do you use the original mounting hole for it? How much clearance do you have between the alternator shaft on the front and the radiator fan blades?
    I had only 1/4 " between the blades and the shaft once the pulleys were
    lined up.
     
    tcfeet, Jun 21, 2009
    #11
  12. panzer

    panzer Super Mod Staff Member

    I used a brace from AutoZone w/ a couple of bends in it. . You need to use belt # #25 9415.
    Here are a couple of shots.

    [​IMG]

    [​IMG]
     
    panzer, Jun 22, 2009
    #12
  13. jkoz79

    jkoz79 New Member

    I am getting to the party pretty late here. What Make model and Year did you order the Alternator for? FLAPS has trouble looking up anything that they dont have all that info for. Thanks
     
    jkoz79, Jul 7, 2013
    #13
  14. blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    78 chevy truck will work fine
     
    blevisay, Jul 8, 2013
    #14