1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone have a part # for V6 flywheel bolts

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Jun 19, 2004.

  1. DanStew

    DanStew Preowned Merkin salesman Staff Member

    Well since i am down there and the flywheel bolts have been on multiple motors, i am thinking bout repalcing them. Does anyone have a part nubmer for Buick Flywheel botls and where is a good palce to buy them??

    Thanks!!!
     
    DanStew, Jun 19, 2004
    #1
  2. James P. Enderwies

    James P. Enderwies Sponsor

    Dan: I'm thinking of just taking one of the old ones down to a good bolt shop and just get some grade 8's for them.

    Should work fine. :)
     
    James P. Enderwies, Jun 19, 2004
    #2
  3. Patrick

    Patrick Super Moderator Staff Member

    They should have flywheel specific bolts at a good AP store. They are (I think) 3/8" fine thread, the same as a Chevy. I think Dad used flexplate bolts for a Small Chev on his Dauntless (auto trans). The head is bigger than a regular bolt of the same size.
     
    Patrick, Jun 19, 2004
    #3
  4. Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    mine came from mr. gasket...

    BUBBA
     
    Jeepenstein, Jun 20, 2004
    #4
  5. oldjeep

    oldjeep Sisyphus at work

    They are just regular Chevy Flywheel bolts. I bought a set of ARP bolts from summit when I used to have the T18.
     
    oldjeep, Jun 20, 2004
    #5
  6. nickmil

    nickmil In mothballs.

    Yup, as said, same as Chev V-8. Most any FLAPS will have them. Usually in a Mr. Gasket package. Nickmil.
     
    nickmil, Jun 21, 2004
    #6
  7. xz3ltt

    xz3ltt I love hockey mom's

    Not 100% sure but you may want to see if you should apply loc-tite type of material to the threads if you don't already. I worked at a dealer and a customers vehicle came back after a trans replacement,,,it had a terriable knocking noise. Yep, the bolts had backed out even though the tech had torqued them... Just a suggestion.
     
    xz3ltt, Jun 21, 2004
    #7