1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Custom Mount?

Discussion in 'Early CJ5 and CJ6 Tech' started by Roboter, Apr 15, 2008.

  1. Roboter

    Roboter Klaatu Barada Jeepto

    Is this tranny mount a custom fab or off the shelf? It's from a sweet 73 I found on the list and I kinda like the setup for mine if it will work. :?
     
    Roboter, Apr 15, 2008
    #1
  2. JeepsRcool

    JeepsRcool Member

    Looks like some grade 8 yellow zinc washers used as spacers.
     
    JeepsRcool, Apr 15, 2008
    #2
  3. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    The frame-to-crossmember spacers are not factory. The cross-member and skid plate look original. The pack of washers between the crossmember and skid are not factory - I think there may have been spacers there, but I don't recall exactly.
     
    timgr, Apr 15, 2008
    #3
  4. mb82

    mb82 I feel great!

    It looks like someone went washer crazy. Look under the tranny at the skidplate mount.
     
    mb82, Apr 15, 2008
    #4
  5. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    with that many spacers it's really hanging low.....I used 3/4" plywood strips as spacers w/ the T18 / D18 swap on the 6
    Jim S.
     
    bkd, Apr 15, 2008
    #5
  6. 1969 CJ-5

    1969 CJ-5 AZ Native

    Washer Crazy... I agree!
     
    1969 CJ-5, Apr 15, 2008
    #6