1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Spare tire carrier for M101

Discussion in 'Jeep Trailer Tech' started by Skullhead, Jul 28, 2006.

  1. Skullhead

    Skullhead Member

    Does anyone know of a spair tire carrier that is made for my M101? I would guess that others would fit with the same bolt pattern. thanks
     
    Skullhead, Jul 28, 2006
    #1
  2. Walldog

    Walldog New Member

    Re: Spair tire carrier for M101

    There is a spare tire carrier designed for the original intended tow vehicle, the Iltis. I've already looked into it and don't think it would mount well on the trailer. It would have to be a front or back wall mount and heavily modified.

    Something like Mike Boyink has on front is nice OR an underbody mount like a pick up truck has been used.

    Here is the Iltis Spare holder
     
    Walldog, Jul 28, 2006
    #2
  3. Skullhead

    Skullhead Member

    Re: Spair tire carrier for M101

    I was at the PA Jeep show and saw someone with a Bantam I believe with a carrier right on the back but I didn't get a close look at it. I think I just might fab one up to bolt to the rear of the trailer, it is plenty stout enough to carry one of those little spairs. Although a spring over and some 37's to match my CJ7 is tempting so I only have to carry one spair. thanks
     
    Skullhead, Jul 30, 2006
    #3
  4. beeser

    beeser Member

    Re: Spair tire carrier for M101

    You might find some ideas in the CDN M101 Yahoo group photo section. Seem to recall seeing a few there.
     
    beeser, Jul 30, 2006
    #4
  5. 48cj2a

    48cj2a http://bantamt3c.com

    Re: Spair tire carrier for M101

    Most mil trailers used the prime movers spare as the trailer spare.
     
    48cj2a, Jul 31, 2006
    #5