1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

10" Drum Brake Bar

Discussion in 'Jeepster Commando and Commando Tech' started by william_cj3b, Jan 10, 2006.

  1. william_cj3b

    william_cj3b 3BOB driver

    I need to find a source for the bar that goes between the shoes. Parking brake won't work without it. Anyone?
     
  2. Jeepsterman

    Jeepsterman I had a beer with Panzer.

    I can check if I have a used one at home. Not sure if Krage would carry them or not.
     
  3. nickmil

    nickmil In mothballs.

    If Jeepsterman or other people on the board don't have one you might try R&P at 503-557-8911. They have lots of used 9" and 10" parts laying around. Nickmil.
     
  4. Jeepsterman

    Jeepsterman I had a beer with Panzer.

    Sorry William, I think I got rid of all my 10" brake stuff. I will keep looking in the shop to see if I have anyhting packed away.
     
  5. william_cj3b

    william_cj3b 3BOB driver

  6. txeagle

    txeagle New Member

    Did you ever find the part you were looking for?? I may have an xtra of what you need it, I'll have to go look, let me know.

    Ben
    Cypress, Tx
     
  7. halfcabber

    halfcabber Half Cabs C101

    If you're still looking for the parts, email me at Jeepsterhalfcabs ( at ) jeepsterhalfcabs.com

    I know I have some parts since I will be taking off the 10" and putting disc brakes under mine, plus I have a number of other Jeepsters and they will either go 11" drums or disc brakes. Are you looking for the front or rear set up? I think I trashed the D27, but I might have some D30 parts, since i did a disc job on the front too.
    Let me know.


    OT/ Are the Dauntless V6 stickers still available? Need to tag my 225 after I get it painted.
     
  8. lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

  9. halfcabber

    halfcabber Half Cabs C101

    Thanks for the welcome and also for the link.
     
  10. willysnut

    willysnut Banned

    Just got off the phone with the folks at Turner 4wd Parts here in Ga., www.thejeep.com he said that part is no longer avail new for 10" brakes. Hope you can find one used. If you have the other have a welding shop cut one out for you out of plate steel using the other for a pattern.