1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

steel top door handles

Discussion in 'Early Jeep Restoration and Research' started by shooter, Jul 3, 2005.

  1. shooter

    shooter New Member

    i got a steel top with broken outside door handles.can someone tell me how to repair,replace? i tried camper t handles but screw hole centers were 1 1/2 centers i need 1 3/4 centers with 5/16 square spindle.any good ideas?
     
    shooter, Jul 3, 2005
    #1
  2. Glenn

    Glenn Kinda grumpy old man Staff Member

    A place that sells service truck type bodies should have them. That's where I got mine, you can get them keyed alike.
     
    Glenn, Jul 3, 2005
    #2
  3. jd7

    jd7 Sponsor

    I used the replacement garage door handles that you buy at Lowes or Home Depot on one of mine one time. Can't remember if they have 1/4 or 5/16 square stock shafts on them.
     
    jd7, Jul 3, 2005
    #3
  4. shooter

    shooter New Member

    i found some identical to original at a truck body place called mill supply 2 brand new under 20 bux thanx for replys new is better when you can go that route without spending a fortune.
     
    shooter, Jul 3, 2005
    #4
  5. 66cj5

    66cj5 Jeep with no name

    got new handles on my top from orr and orr supply in Chicago. ran about $35 for inner (galvinized) latches and outer (chrome) handles.
     
    66cj5, Jul 4, 2005
    #5