Dauntless Timing Mark?

I'm working on rebuilding an old Odd fire and can't find any timing mark on the dampener or a pointer on the front cover. How do time this thing?

 

Even if you could find the mark, it is best to confirm it is accurate by finding top dead center. It’s pretty easy to do. Just remove the #1 spark plug and attach a measuring tool - you can even do it with a screwdriver instead of buying an official “tool”

https://www.speedwaymotors.com/the-toolbox/how-to-find-top-dead-center/28657

 

Thanks for the info. I have what looks like a casting parting line on the dampener. But no pointer. Is it cast in or a bolt on?

https://i.postimg.cc/gjPdSYW5/DSC01352.jpg

 

225 oddfires had a slot on the balancer and a timing marks cast into the cover.
231's had the timing marks bolt on to the cover.
The covers are interchangeable so it is possible yours is the later cover with the marks gone.

 

That must be what this one is for. The cover has 3 holes to take the bolts and the dowel pin.

 

That is the pointer. I think that style is used on 231 and aftermarket 225 timing covers. The balancer should have a grove machined into the outside edge.

 

This is what my 225 timing marks look like.

 

This is what I suspect happened to mine. My pointer was WAAAYYY out from top dead center compared to groove on balancer. I made a new groove and all is well.