1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Oil Sensor Connector

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Sep 21, 2021.

  1. tripilio

    tripilio Proud American!

    I am looking for a source or part number for the connector that goes on this temp sensor. Thanks!
    IMG_20210921_183400_copy_1664x1248.jpg
     
  2. Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Oil pressure sender?
    :confused:
     
    tripilio likes this.
  3. tripilio

    tripilio Proud American!

    :rofl:My mistake! You are correct. I was working on the temp sensor and I guess it got stuck on my little noggin.
     
  4. Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    It's OK you can change the thread title in the first post. Mine has an old school female spade connector from my old f-134.
     
  5. truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Are you looking for a sending unit to go to a gauge or just to replace the unit that goes to the light in the speedometer cluster?
     
    tripilio likes this.
  6. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Mark T. and tripilio like this.
  7. John Gedde

    John Gedde Been around the block once or twice...

    Pico Wiring part number 5665PT or Standard part number S2292. That what I used for mine. Can get one or the other from your favorite auto parts supplier.

    John
     
    Mark T. and tripilio like this.
  8. tripilio

    tripilio Proud American!

    Just the connector to wire it to the gauge.
     
  9. tripilio

    tripilio Proud American!

  10. tripilio

    tripilio Proud American!

    Awesome! I'll check.