1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dimension Needed Off Passenger Seat Mount.

Discussion in 'Intermediate CJ-5/6/7/8' started by dsrt4, Sep 15, 2020.

  1. dsrt4

    dsrt4 Member

    Years ago like a dummy I cut up my passenger seat mount and removed the pivoting/removal?? brackets to pivot the seat and remove it. I made some new ones and left them long. Can someone with a stock set let me know the distance from the top of the tube to the middle of the fixed pivot? I'm trying to get the height on the pivot from the top of the tub that mounts the top front of the tool box.

    Anyone? Thank you!

    Pic..

    [​IMG]
    nodejs validate json
     
    dsrt4, Sep 15, 2020
    #1
  2. Richard in AZ

    Richard in AZ I just don't understand the like of patina

    From a seat I have on the shop floor.....

    Is below what you're looking for?

    Richard

    [​IMG]

    [​IMG]
     
    Richard in AZ, Sep 15, 2020
    #2
  3. Richard in AZ

    Richard in AZ I just don't understand the like of patina

    Opps.....The photo above is off a 70 model CJ5.....Intermediate might be different?

    Richard
     
    Richard in AZ, Sep 15, 2020
    #3
  4. dsrt4

    dsrt4 Member

    That should do it! Thanks!
     
    dsrt4, Sep 15, 2020
    #4
  5. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Should be the same. At some point another brace going forward was added (seen here), though that does not change the seat position.

    SeatBracketAngle (887 x 722).jpg

    Zeroed on the dash.
     
    timgr, Sep 15, 2020
    #5
  6. dsrt4

    dsrt4 Member

    Thank you both for the length and the angle! That will make it pretty easy to recreate. Now onto the drivers side fiasco...
     
    dsrt4, Sep 15, 2020
    #6